 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FERROXCUBE DATA SHEET E47/20/16 E cores and accessories Supersedes data of September 2004 2008 Sep 01 Ferroxcube E cores and accessories CORE SETS Effective core parameters SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of core half VALUE 0.380 20800 88.9 234 226 53 UNIT mm-1 mm3 mm mm2 mm2 g handbook, halfpage E47/20/16 46.9 0.8 32.4 0.65 15.6 0.25 12.1 min. 19.6 0.2 15.6 0.25 Dimensions in mm. CBW059 Fig.1 E47/20/16 core half. Core halves AL measured in combination with a non-gapped core half, clamping force for AL measurements 40 20 N, unless stated otherwise. GRADE 3C81 AL (nH) 100 5%(1) 160 315 400 5%(1) 5%(1) 8%(1) 250 5%(1) e 30 48 76 95 121 190 2280 30 48 76 95 121 190 1660 2280 1330 1690 2280 TOTAL AIR GAP (m) 5080 2720 1540 1140 860 490 0 5080 2720 1540 1140 860 490 0 0 0 0 0 TYPE NUMBER E47/20/16-3C81-E100 E47/20/16-3C81-E160 E47/20/16-3C81-E250 E47/20/16-3C81-E315 E47/20/16-3C81-E400 E47/20/16-3C81-A630 E47/20/16-3C81 E47/20/16-3C90-E100 E47/20/16-3C90-E160 E47/20/16-3C90-E250 E47/20/16-3C90-E315 E47/20/16-3C90-E400 E47/20/16-3C90-A630 E47/20/16-3C90 E47/20/16-3C91 E47/20/16-3C92 E47/20/16-3C94 E47/20/16-3C95 630 10% 7540 25% 3C90 100 250 315 5%(1) 5%(1) 5%(1) 160 5%(1) 400 8%(1) 630 10% 5500 25% 3C91 3C92 3C94 3C95 7540 25% 4400 25% 5600 25% 7540 25% 2008 Sep 01 425 Ferroxcube E cores and accessories E47/20/16 GRADE 3F3 AL (nH) 100 5%(1) 160 315 400 5%(1) 5%(1) 8%(1) 250 5%(1) e 30 48 76 95 121 190 1540 TOTAL AIR GAP (m) 5080 2720 1540 1140 860 490 0 TYPE NUMBER E47/20/16-3F3-E100 E47/20/16-3F3-E160 E47/20/16-3F3-E250 E47/20/16-3F3-E315 E47/20/16-3F3-E400 E47/20/16-3F3-A630 E47/20/16-3F3 630 10% 5100 25% Note 1. Measured in combination with an equal gapped core half. Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 25 kHz; T = 100 C 320 320 320 370 320 320 320 f = 25 kHz; = 200 mT; B T = 100 C 4.3 2.3 - - - - - f = 100 kHz; B = 100 mT; T = 100 C - 2.7 1.7(1) 2.1 2.1 - 2.5 CORE LOSS (W) at f = 100 kHz; B = 200 mT; T = 25 C - - - - - 13.1 - f = 100 kHz; B = 200 mT; T = 100 C - - 8.8(1) 11 11 12.5 - f = 400 kHz; B = 50 mT; T = 100 C - - - - - - 4.0 3C81 3C90 3C91 3C92 3C94 3C95 3F3 Note 1. Measured at 60 C. 2008 Sep 01 426 Ferroxcube E cores and accessories COIL FORMERS General data for E47/20/16 coil former without pins PARAMETER Coil former material Maximum operating temperature SPECIFICATION E47/20/16 polyamide (PA6.6), glass reinforced, flame retardant in accordance with "UL 94V-2"; UL file number E41938(M) 130 C, "IEC 60085", class B handbook, full pagewidth 23.5 max. 21.6 31.75 max. 16.35 min. 18.3 CBW060 Dimensions in mm. Fig.2 E47/20/16 coil former. Winding data and area product for E47/20/16 coil former without pins NUMBER OF SECTIONS 1 MINIMUM WINDING AREA (mm2) 130 NOMINAL WINDING WIDTH (mm) 21.6 AVERAGE LENGTH OF TURN (mm) 93.3 AREA PRODUCT Ae x Aw (mm4) 30400 TYPE NUMBER CP-E47/20/16-1S 2008 Sep 01 427 Ferroxcube E cores and accessories General data for 12-pins E47/20/16 coil former PARAMETER Coil former material Maximum operating temperature Pin material Resistance to soldering heat Solderability SPECIFICATION E47/20/16 polyamide (PA6.6), glass reinforced, flame retardant in accordance with "UL 94-HB"; UL file number E41938(M) 130 C, "IEC 60085", class B copper-zinc alloy (CuZn), tin (Sn) plated "IEC 60068-2-20", Part 2, Test Tb, method 1B: 350 C, 3.5 s "IEC 60068-2-20", Part 2, Test Ta, method 1: 235 C, 2 s handbook, full pagewidth 31.5 max. 16 min. 23.5 max. 21.4 32.3 max. 18.3 4.3 min. 5.1 (1) 1.3 0.65 7.6 45.1 max. 27.95 33.7 max. 3 min. CBW061 (1) one place only Dimensions in mm. Fig.3 E47/20/16 coil former: 12-pins. Winding data and area product for 12-pins E47/20/16 coil former NUMBER OF SECTIONS 1 MINIMUM WINDING AREA (mm2) 131 NOMINAL WINDING WIDTH (mm) 21.4 AVERAGE LENGTH OF TURN (mm) 94.7 AREA PRODUCT Ae x Aw (mm4) 30650 TYPE NUMBER CPH-E47/16-1S-12PD-Z 2008 Sep 01 428 Ferroxcube E cores and accessories DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS E47/20/16 This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 429 |
Price & Availability of E16-3C81
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |